Search

Categories

Downloads

Information

100% secure shopping!
Your data are safe with us. SSL-Protected!

E/PSB 10000 Bidirectional DC-Power Supply energy recovery 30-1080 k

E/PSB 10000 4U_r The new programmable series »E/PSB 10000-4U« of EPS Electronic Power Supply is a bidirectional power supply that meets multiple requirements and solves multiple tasks.
First and foremost, the system is a power supply. It also meets the function of an electronic load by absorbing energy and feeding it back into the grid. The parameters for the power supply as well as for those for the electronic load can be adjusted flexibly. The integrated functions include a battery test mode, a arbitrary generator and a vehicle start-up curve. As the internal resistance is adjustable, the functioning of batteries, fuel cells or photovoltaic modules can also be reproduced. The power supply E/PSB can also be used to return the energy in test processes, for example on a drive test rig, to the supply source.
The following simulations are available: Battery (SOC and DoD), LV123/LV124LV148 (DIN 40839), PV (EN50530) and FC.

The bidirectional power supplies are modular. They enable services up to 30kW with a flexible output stage, for example from 500V and +-180A in a 19inch, 4U housing. The spectrum of devices ranges from a output voltage from 60 to 2000V to in-/output currents from +-40 to 1000A. It is also possible to combine up to 36 devices in a single network to build up up to 1,08MW. The change between source and sink operation is seamless and continuous. This means there is no dwell time, and it is still too short, at zero crossing.

Actual values and setpoints of output voltage, current and power are clearly displayed on a graphic display. The 5" TFT coloured display is touch-sensitive and allows intuitive operation of all functions of the device. For remote control using a PC or PLC the devices are provided as standard with a Ethernet, USB-B slot on the rear side as well as a galvanically isolated analog interface. Via optional plug-in interface modules, other digital interfaces such as Profibus, ProfiNet, ModBus, a CANopen and more can be added.These enable the devices to be connected to standard industrial buses simply by changing or adding a small module. The configuration, if necessary at all, is simple. Thus the power supplies may, for example, be operated with other power supplies or even other types of equipment or controlled by a PC or PCL, all using the digital interfaces.

Further options are a mains monitoring module EPS/ELR ENS (BISI), preconfigured cabinet systems, a water cooling system, where no more heat is released into the air, extended warranty and calibration with protocol.

Energy efficiency: Energy recovery, high efficiency, temperature controlled fans, water cooling system

Scope of delivery:
Power Supply Unit
Test report
AC-plug 5 pole
Share bus plug
Remote Sensing plug
1,8m USB cable
Set of DC-terminal cover
Set for strain relief
USB-Stick with manual and Software

E/PSB 10060-1000 4U Bidirectional DC-Power Supply+energy recover

E/PSB 10060-1000 4U Bidirectional DC-Power Supply+energy recover
Order Code: 124370

Voltage:  0-60 VDC
Current:  0-1000 A
Output Power:  30000 W
Design:  19 inch

Productdetails

Output Voltage: 0 V DC - 60 V DC
In-/Output Current: 0 A -1000 A
Output Power: 0-30000 W
Input Voltage: 342-528 V AC; 3ph 45/66 Hz
Dimensions (WxHxD): 19"x4Ux670mm
Integrated Function and Arbitrary Generator
2 Quadrant operation
Battery-Simulation
PV-Simulation (MPP Tracking)
FC-Simulation
Programmable at the frontside
Supervision, OVL, UVL
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Internal resistance regulation (CR)
Series Remote sensing (auto-sensing)
Parallel operation
Preset of 5 different output values
5 User Profiles
Analog (ISO)/USB/LAN Interface with LabView VIs
Extra USB-Port for USB-Sticks

Country of origin: Germany
Customs tariff code: 8504.3200

Accessories


More images


E/PSB 10080-1000 4U Bidirectional DC-Power Supply+energy recover

E/PSB 10080-1000 4U Bidirectional DC-Power Supply+energy recover
Order Code: 124371

Voltage:  0-150 VDC
Current:  0-1000 A
Output Power:  30000 W
Design:  19 inch

Productdetails

Output Voltage: 0 V DC - 80 V DC
In-/Output Current: 0 A -1000 A
Output Power: 0-30000 W
Input Voltage: 342-528 V AC; 3ph 45/66 Hz
Dimensions (WxHxD): 19"x4Ux670mm
Integrated Function and Arbitrary Generator
2 Quadrant operation
Battery-Simulation
PV-Simulation (MPP Tracking)
FC-Simulation
Programmable at the frontside
Supervision, OVL, UVL
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Internal resistance regulation (CR)
Series Remote sensing (auto-sensing)
Parallel operation
Preset of 5 different output values
5 User Profiles
Analog (ISO)/USB/LAN Interface with LabView VIs
Extra USB-Port for USB-Sticks

Country of origin: Germany
Customs tariff code: 8504.3200

Accessories


More images


E/PSB 10200-420 4U Bidirectional DC-Power Supply+energy recovery

E/PSB 10200-420 4U Bidirectional DC-Power Supply+energy recovery
Order Code: 124372

Voltage:  0-200 VDC
Current:  0-420 A
Output Power:  30000 W
Design:  19 inch

Productdetails

Output Voltage: 0 V DC - 200 V DC
In-/Output Current: 0 A - 420 A
Output Power: 0-30000 W
Input Voltage: 342-528 V AC; 3ph 45/66 Hz
Dimensions (WxHxD): 19"x4Ux670mm
Integrated Function and Arbitrary Generator
2 Quadrant operation
Battery-Simulation
PV-Simulation (MPP Tracking)
FC-Simulation
Programmable at the frontside
Supervision, OVL, UVL
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Internal resistance regulation (CR)
Series Remote sensing (auto-sensing)
Parallel operation
Preset of 5 different output values
5 User Profiles
Analog (ISO)/USB/LAN Interface with LabView VIs
Extra USB-Port for USB-Sticks

Country of origin: Germany
Customs tariff code: 8504.3200

Accessories


More images


E/PSB 10360-240 4U Bidirectional DC-Power Supply+energy recovery

E/PSB 10360-240 4U Bidirectional DC-Power Supply+energy recovery
Order Code: 124373

Voltage:  0-360 VDC
Current:  0-240 A
Output Power:  30000 W
Design:  19 inch

Productdetails

Output Voltage: 0 V DC - 360 V DC
In-/Output Current: 0 A - 240 A
Output Power: 0-30000 W
Input Voltage: 342-528 V AC; 3ph 45/66 Hz
Dimensions (WxHxD): 19"x4Ux670mm
Integrated Function and Arbitrary Generator
2 Quadrant operation
Battery-Simulation
PV-Simulation (MPP Tracking)
FC-Simulation
Programmable at the frontside
Supervision, OVL, UVL
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Internal resistance regulation (CR)
Series Remote sensing (auto-sensing)
Parallel operation
Preset of 5 different output values
5 User Profiles
Analog (ISO)/USB/LAN Interface with LabView VIs
Extra USB-Port for USB-Sticks

Country of origin: Germany
Customs tariff code: 8504.3200

Accessories


More images


Show 1 to 4 (of in total 9 products) Sites:  1  2  3  [next >>] 
You receive an overview to our services and products in our catalogue. Request today your copy by phone +49-(0)821-570451-0. Alternatively you can download even now our catalogue as pdf document on your PC or equivalent browse it at the screen.
⇏ Actual EPS-catalogue (PDF)