Search

Categories

Downloads

Information

100% secure shopping!
Your data are safe with us. SSL-Protected!

E/PSE 9000-3U Laboratory Power Supply 3.3-150 kW

E/PSE 9000_3u_front The electronic high performance power supplies of the »E/PSE 9000 3U« series of EPS Electronic Power Supplies are especially suitable for test systems and industrial controls due to their compact construction in a 19" enclosure with 3 height units (3U).
DC output voltages between 0-40V (SELV) and 0-1500V, output currents between 0-40A and 0-510A and output power ratings of 0- 3.3kW/5kW/6.6kW/10kW/15kW are available.

Actual values, set values, status and alarms are clearly represented on the blue LCD-display.
For remote control using a PC or PLC the devices are provided as standard with an Ethernet and USB-B slot on the rear side as well as a analog interface. All interface are galvanically isolated to the unit up to 1500V DC.
Thus the power supplies may, for example, be operated with other power supplies or even other types of equipment or controlled by a PC or PCL, all using the digital interfaces.

In addtion, the devices offer as standard the parallel switching in Shared Bus operation for constant current sharing and for extension of the total power of up to 150kW and up to 5100A per 42U rack.
Also you have the possibility to connect the compatible power supplies via a Shared Bus, in order to create a so-called two-quadrant system. Typical applications i.e. for the source-sink principle are: battery test with automatic charge and discharge cycles, automotive electronic tests with simulation of transients (like voltage break-ins during engine starts) and cyclic charging and discharging of capacitors. A series operation is also possible with max. potential shift of 400V against PE on any DC minus pole.

All models are controlled by microprozessors. These enable an exact and fast measurement and display of actual values.
With the lock push button the controls can be locked, in order to protect the equipment from unintentional misuse.

In order to achieve rapid voltage changes with minimal ramp up and down times, the filter capacity can be reduced with the option High speed »EPS/HS«. It results in ramp times in the range of microseconds.
Models with a nominal output voltage of 200V or higher include a discharge circuit for the output capacities. For no load or low load situations, it ensures that the dangerous output voltage can sink to under 60V DC in max. 10 seconds after the DC output has been switched off (SELV according to EN60950).

Further options are water cooling (up to 200V) and calibration with protocol.

Energy efficiency: Auto-ranging, high efficiency, temperature controlled fans

Scope of delivery:
Power Supply Unit
Test report
Operation Manual
AC-plug 5 pole
Share bus plug
Remote Sensing plug
1,8m USB cable
USB-stick "Manual, Software, Drivers&Tools'"

E/PSE 9360-80 3U Laboratory Power Supply

E/PSE 9360-80 3U Laboratory Power Supply
Order Code: 124210

Voltage:  0-360 VDC
Current:  0-80 A
Output Power:  0-10000 W
Design:  19 inch

Productdetails

Output Voltage: 0 VDC - 360 VDC
Output Current: 0 A - 80 A
Output Power: 0-10000 W
Input Voltage: 400 VAC +-15%; 3ph 50/60 Hz
Dimensions (WxHxD): 19"x3Ux609mm
Supervision, OVL, UVL
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Remote sensing (auto-sensing)
Series and Parallel operation
Preset of 5 different output values
Analog (ISO) Interface
USB Interface with LabView VIs

Country of origin: Germany
Custom tariff code: 8504.3121

Accessories


More images


Download
E/PSE 9750-40 3U Laboratory Power Supply

E/PSE 9750-40 3U Laboratory Power Supply
Order Code: 124212

Voltage:  0-750 VDC
Current:  0-40 A
Output Power:  0-10000 W
Design:  19 inch

Productdetails

Output Voltage: 0 VDC - 750 VDC
Output Current: 0 A - 40 A
Output Power: 0-10000 W
Input Voltage: 400 VAC +-15%; 3ph 50/60 Hz
Dimensions (WxHxD): 19"x3Ux609mm
Supervision, OVL, UVL
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Remote sensing (auto-sensing)
Series and Parallel operation
Preset of 5 different output values
Analog (ISO) Interface
USB Interface with LabView VIs

Country of origin: Germany
Custom tariff code: 8504.3121

Accessories


More images


Download
E/PSE 9500-90 3U Laboratory Power Supply

E/PSE 9500-90 3U Laboratory Power Supply
Order Code: 124217

Voltage:  0-500 VDC
Current:  0-90 A
Output Power:  0-15000 W
Design:  19 inch

Productdetails

Output Voltage: 0 VDC - 500 VDC
Output Current: 0 A - 90 A
Output Power: 0-15000 W
Input Voltage: 400 VAC +-15%; 3ph 50/60 Hz
Dimensions (WxHxD): 19"x3Ux609mm
Supervision, OVL, UVL
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Remote sensing (auto-sensing)
Series and Parallel operation
Preset of 5 different output values
Analog (ISO) Interface
USB Interface with LabView VIs

Country of origin: Germany
Custom tariff code: 8504.3121

Accessories


More images


Download
E/PSE 9750-60 3U Laboratory Power Supply

E/PSE 9750-60 3U Laboratory Power Supply
Order Code: 124218

Voltage:  0-750 VDC
Current:  0-60 A
Output Power:  0-15000 W
Design:  19 inch

Productdetails

Output Voltage: 0 VDC - 750 VDC
Output Current: 0 A - 60 A
Output Power: 0-15000 W
Input Voltage: 400 VAC +-15%; 3ph 50/60 Hz
Dimensions (WxHxD): 19"x3Ux609mm
Supervision, OVL, UVL
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Remote sensing (auto-sensing)
Series and Parallel operation
Preset of 5 different output values
Analog (ISO) Interface
USB Interface with LabView VIs

Country of origin: Germany
Custom tariff code: 8504.3121

Accessories


More images


Download
Show 1 to 4 (of in total 19 products) Sites:  1  2  3  4  5  [next >>] 
You receive an overview to our services and products in our catalogue. Request today your copy by phone +49-(0)821-570451-0. Alternatively you can download even now our catalogue as pdf document on your PC or equivalent browse it at the screen.
⇏ Actual EPS-catalogue (PDF)