Search

Categories

Downloads

Information

100% secure shopping!
Your data are safe with us. SSL-Protected!

E/PSI 10000 Laboratory Power Supply 30-1080 kW

E/PSI 10000 4U The new electronic high performance power supplies of the »E/PSI 10000« series of EPS Electronic Power Supplies are especially suitable for test systems and industrial controls due to their compact construction in a 19" enclosure with 4 height units (4U). DC output voltages between 0-60V and 0-2000V, output currents between 0-40A and 0-1000A with an output power of 30kW are available. Set values and actual values, status and notifications are clearly represented on the intuitive TFT touch panel. Apart from basic functions of power supplies, set point curves can be produced in the integrated function and arbitrary generator (sine, rectangular, triangular, Offset and other curve types). Arbitrary curves can be saved to and loaded from a USB flash drive. Additional a photovoltaic array and a fuel cell simulation as well a battery charging with charging characteristic is possible.

For remote control using a PC or PLC the devices are provided as standard with a Ethernet, USB-B slot on the rear side as well as a galvanically isolated analog interface. Via optional plug-in interface modules, other digital interfaces such as Profibus, ProfiNet, ModBus, a CANopen interface and more can be added.These enable the devices to be connected to standard industrial buses simply by changing or adding a small module. The configuration, if necessary at all, is simple. Thus the power supplies may, for example, be operated with other power supplies or even other types of equipment or controlled by a PC or PCL, all using the digital interfaces.

In addition, the devices offer as standard the parallel switching in Shared Bus operation for constant current sharing and for extension of the total power of up to 240kW in up to 47U cabinet or systems up to 1.08MW according to customer requirements. A master-slave connection with totalizing of the actual values (Voltage, Current, Power) of the slave units is also provided as standard. A series operation is also possible with max. potential shift of 400V against PE on any DC minus pole.

Actual values and setpoints of output voltage, current and power are clearly displayed on a graphic display. The 5" TFT coloured display is touch-sensitive and allows intuitive operation of all functions of the device.

Further options are water cooling system, where no more heat is released into the air as well calibration with protocol and extended warranty.

Energy efficiency: Auto-ranging, high efficiency, temperature controlled fans, water cooling system

Scope of delivery:
Power Supply Unit
Test report
AC-plug 5 pole
Share bus plug
Remote Sensing plug
1,8m USB cable
Set of DC-terminal cover
Set for strain relief
USB-Stick with manual and Software

E/PSI 10080-1000-4U Laboratory Power Supply

E/PSI 10080-1000-4U Laboratory Power Supply
Order Code: 124351

Voltage:  0-80 VDC
Current:  0-1000 A
Output Power:  30000 W
Design:  19 inch

Productdetails

Output Voltage: 0 VDC - 80 VDC
Output Current: 0 A -1000 A
Output Power: 0-30 kW
Input Voltage: 342-528 VAC; 3ph 50/60 Hz
Dimensions (WxHxD): 19"x4Ux670mm
Integrated Function and Arbitrary Generator
PV-Simulation
FC-Simulation
Programmable at the frontside
Supervision, OVL, UVL
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Internal resistance regulation (CR)
Series Remote sensing (auto-sensing)
Parallel operation
Preset of 5 different output values
5 User Profiles
5"-TFT-Touch-Panel
Analog (ISO)/USB/LAN Interface with LabView VIs/Ethernet
Extra USB-Port for USB-Sticks

Country of origin: Germany
Customs tariff code: 8504.3121

Accessories


More images


Download
E/PSI 10200-420-4U Laboratory Power Supply

E/PSI 10200-420-4U Laboratory Power Supply
Order Code: 124352

Voltage:  0-200 VDC
Current:  0-420 A
Output Power:  30000 W
Design:  19 inch

Productdetails

Output Voltage: 0 VDC - 200 VDC
Output Current: 0 A - 420 A
Output Power: 0-30 kW
Input Voltage: 342-528 VAC; 3ph 50/60 Hz
Dimensions (WxHxD): 19"x4Ux670mm
Integrated Function and Arbitrary Generator
PV-Simulation
FC-Simulation
Programmable at the frontside
Supervision, OVL, UVL
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Internal resistance regulation (CR)
Series Remote sensing (auto-sensing)
Parallel operation
Preset of 5 different output values
5 User Profiles
5"-TFT-Touch-Panel
Analog (ISO)/USB/LAN Interface with LabView VIs/Ethernet
Extra USB-Port for USB-Sticks

Country of origin: Germany
Customs tariff code: 8504.3121

Accessories


More images


Download
E/PSI 10360-240-4U Laboratory Power Supply

E/PSI 10360-240-4U Laboratory Power Supply
Order Code: 124353

Voltage:  0-360 VDC
Current:  0-240 A
Output Power:  30000 W
Design:  19 inch

Productdetails

Output Voltage: 0 VDC - 360 VDC
Output Current: 0 A - 240 A
Output Power: 0-30 kW
Input Voltage: 342-528 VAC; 3ph 50/60 Hz
Dimensions (WxHxD): 19"x4Ux670mm
Integrated Function and Arbitrary Generator
PV-Simulation
FC-Simulation
Programmable at the frontside
Supervision, OVL, UVL
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Internal resistance regulation (CR)
Series Remote sensing (auto-sensing)
Parallel operation
Preset of 5 different output values
5 User Profiles
5"-TFT-Touch-Panel
Analog (ISO)/USB/LAN Interface with LabView VIs/Ethernet
Extra USB-Port for USB-Sticks

Country of origin: Germany
Customs tariff code: 8504.3121

Accessories


More images


Download
E/PSI 10500-180-4U Laboratory Power Supply

E/PSI 10500-180-4U Laboratory Power Supply
Order Code: 124354

Voltage:  0-500 VDC
Current:  0-180 A
Output Power:  30000 W
Design:  19 inch

Productdetails

Output Voltage: 0 VDC - 500 VDC
Output Current: 0 A - 180 A
Output Power: 0-30 kW
Input Voltage: 342-528 VAC; 3ph 50/60 Hz
Dimensions (WxHxD): 19"x4Ux670mm
Integrated Function and Arbitrary Generator
PV-Simulation
FC-Simulation
Programmable at the frontside
Supervision, OVL, UVL
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Internal resistance regulation (CR)
Series Remote sensing (auto-sensing)
Parallel operation
Preset of 5 different output values
5 User Profiles
5"-TFT-Touch-Panel
Analog (ISO)/USB/LAN Interface with LabView VIs/Ethernet
Extra USB-Port for USB-Sticks

Country of origin: Germany
Customs tariff code: 8504.3121

Accessories


More images


Download
Show 1 to 4 (of in total 8 products) Sites:  1  2  [next >>] 
You receive an overview to our services and products in our catalogue. Request today your copy by phone +49-(0)821-570451-0. Alternatively you can download even now our catalogue as pdf document on your PC or equivalent browse it at the screen.
⇏ Actual EPS-catalogue (PDF)