Search

Categories

Downloads

Information

100% secure shopping!
Your data are safe with us. SSL-Protected!

E/PSI 9000-2U Laboratory Power Supply 1000-3000 W

E/PSI9000-2U_front The electronic high performance power supplies »E/PSI 9000 2U« series of EPS Electronic Power Supplies are especially suitable for test systems and industrial controls due to their compact construction in a 19" enclosure with 2 height units (2U). DC output voltages between 0-80V and 0-750V, output currents between 0-4A and 0-120A and output power ratings of 0- 1000/1500/3000W are available.
Apart from basic functions of power supplies, set point curves can be produced in the integrated function and arbitrary generator (sine, rectangular, triangular, Offset and other curve types). Arbitrary curves can be saved to and loaded from a USB flash drive. In order to achieve rapid voltage changes with minimal ramp up and down times, the filter capacity can be reduced with the option High speed »EPS/HS«. It results in ramp times in the range of microseconds. Additional a photovoltaic array and a fuel cell simulation as well a battery charging with charging characteristic is possible.

For remote control using a PC or PLC the devices are provided as standard with a USB-B slot on the rear side as well as a galvanically isolated analog interface. Via optional plug-in interface modules, other digital interfaces such as Profibus, ProfiNet, ModBus, CANopen, a GPIB interface and more can be added. These enable the devices to be connected to standard industrial buses simply by changing or adding a small module. The configuration, if necessary at all, is simple. Thus the power supplies may, for example, be operated with other power supplies or even other types of equipment or controlled by a PC or PCL, all using the digital interfaces.

In addition, the devices offer as standard the parallel switching in Shared Bus operation for constant current sharing and for extension of the total power of up to 30kW per 42U rack. A master-slave connection with totalizing of the actual values (Voltage, Current, Power) of the slave units is provided as standard. Operating in this way allow up to 10 units to be combined to a single system. Also you have the possibility to connect the compatible power supplies via a Shared Bus, in order to create a so-called two-quadrant system. Typical applications i.e. for the source-sink principle are: battery test with automatic charge and discharge cycles, automotive electronic tests with simulation of transients (like voltage break-ins during engine starts) and cyclic charging and discharging of capacitors. A series operation is also possible with max. potential shift of 400V against PE on any DC minus pole.

All models are controlled by microprocessors. These enable an exact and fast measurement and display of actual values. Set values and actual values, status and notifications are clearly represented on the intuitive TFT touch panel, too.
Models with a nominal output voltage of 200V or higher include a discharge circuit for the output capacities. For no load or low load situations, it ensures that the dangerous output voltage can sink to under 60V DC in max. 10 seconds after the DC output has been switched off (SELV according to EN60950).

Optionally available is the calibration with protocol.

Energy efficiency: Auto-ranging, high efficiency, temperature controlled fans

Scope of delivery:
Power Supply Unit
Mains cord Euro,UK plug (depending on destination)
USB cable 1,8m
Share bus plug
Remote Sensing plug
Set of mounting brackets (19" <-> Desktop)
USB-Stick with manual and Software

E/PSI 9500-10 2U Laboratory Power Supply

E/PSI 9500-10 2U Laboratory Power Supply
Order Code: 102625

Voltage:  0-500 VDC
Current:  0-10 A
Output Power:  0-1500 W
Design:  19 inch

Productdetails

Output Voltage: 0 VDC - 500 VDC
Output Current: 0 A - 10 A
Output Power: 0-1500 W
Input Voltage: 90-264 VAC, 1 ph.+N; 50/60 Hz
Dimensions (WxHxD): 19"x2Ux463mm
Integrated Function and Arbitrary Generator
PV-Simulation
FC-Simulation
Programmable at the frontside
Supervision, i.e. OVD, UVD
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Internal resistance regulation (CR)
Remote sensing (auto-sensing)
Parallel operation
Preset of 5 different output values
5 User Profiles
Analog Interface, isolated
USB Interface with LabView VIs
Extra USB-Port for USB-Sticks

Country of origin: Germany
Custom tariff code: 8504.3121

Accessories


More images


Download
E/PSI 9750-06 Laboratory Power Supply

E/PSI 9750-06 Laboratory Power Supply
Order Code: 102626

Voltage:  0-750 VDC
Current:  0-6 A
Output Power:  0-1500 W
Design:  19 inch

Productdetails

Output Voltage: 0 VDC - 750 VDC
Output Current: 0 A - 6 A
Output Power: 0-1500 W
Input Voltage: 90-264 VAC, 1 ph.+N; 50/60 Hz
Dimensions (WxHxD): 19"x2Ux463mm
Integrated Function and Arbitrary Generator
PV-Simulation
FC-Simulation
Programmable at the frontside
Supervision, i.e. OVD, UVD
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Internal resistance regulation (CR)
Remote sensing (auto-sensing)
Parallel operation
Preset of 5 different output values
5 User Profiles
Analog Interface, isolated
USB Interface with LabView VIs
Extra USB-Port for USB-Sticks

Country of origin: Germany
Custom tariff code: 8504.3121

Accessories


More images


Download
E/PSI 9200-50 2U Laboratory Power Supply

E/PSI 9200-50 2U Laboratory Power Supply
Order Code: 102627

Voltage:  0-200 VDC
Current:  0-50 A
Output Power:  0-3000 W
Design:  19 inch

Productdetails

Output Voltage: 0 VDC - 200 VDC
Output Current: 0 A - 50 A
Output Power: 0-3000 W
Input Voltage: 90-264 VAC, 1 ph.+N; 50/60 Hz
Dimensions (WxHxD): 19"x2Ux463mm
Integrated Function and Arbitrary Generator
PV-Simulation
FC-Simulation
Programmable at the frontside
Supervision, i.e. OVD, UVD
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Internal resistance regulation (CR)
Remote sensing (auto-sensing)
Parallel operation
Preset of 5 different output values
5 User Profiles
Analog Interface, isolated
USB Interface with LabView VIs
Extra USB-Port for USB-Sticks

Country of origin: Germany
Custom tariff code: 8504.3121

Accessories


More images


Download
E/PSI 9360-30 2U Laboratory Power Supply

E/PSI 9360-30 2U Laboratory Power Supply
Order Code: 102628

Voltage:  0-360 VDC
Current:  0-30 A
Output Power:  0-3000 W
Design:  19 inch

Productdetails

Output Voltage: 0 VDC - 360 VDC
Output Current: 0 A - 30 A
Output Power: 0-3000 W
Input Voltage: 90-264 VAC, 1 ph.+N; 50/60 Hz
Dimensions (WxHxD): 19"x2Ux463mm
Integrated Function and Arbitrary Generator
PV-Simulation
FC-Simulation
Programmable at the frontside
Supervision, i.e. OVD, UVD
Protection: OVP, OCP, OPP and OTP
Constant Voltage- (CV) Current (CC) and Power (CP)
Internal resistance regulation (CR)
Remote sensing (auto-sensing)
Parallel operation
Preset of 5 different output values
5 User Profiles
Analog Interface, isolated
USB Interface with LabView VIs
Extra USB-Port for USB-Sticks

Country of origin: Germany
Custom tariff code: 8504.3121

Accessories


More images


Download
Show 9 to 12 (of in total 18 products) Sites: [<< previous]   1  2  3  4  5  [next >>] 
You receive an overview to our services and products in our catalogue. Request today your copy by phone +49-(0)821-570451-0. Alternatively you can download even now our catalogue as pdf document on your PC or equivalent browse it at the screen.
⇏ Actual EPS-catalogue (PDF)